DIP Pogo Pin, SMT with location peg or Throughboard mounting
- Gold finish on contact area and termination.
- Packaged in Tape & Reel, with Pick & Place cap.
- Mates with any contact surface
- Barrel & plunger: Brass/Be-Cu/Phosphor bronze
- Plating: Gold plated (According to customer requirements)
- Spring: SUS surface treatment
- Life test: 20,000 cycles
- Rated current & voltage: DC 36V; 2A
Description
Selection
Through hole pogo pin contacts manufacturer. A Pogo pin is a device used in electronics to establish a connection between two printed circuit boards. Our main product is spring loaded contact and pogo pin connector. CFE Pogo Pin contacts provide a reliable electrical connection in the most rigorous environments. Not easy to corrode, oxidize, increase electric conductivity, reduce impedance. The contact is more stable, so the conductivity of the product will be better.
Specification of Through hole pogo pin contacts
| Materials | Plunger | Brass 0.125um Au over Ni |
| Barrel | Brass 0.125um Au over Ni | |
| Spring | SUS 304 Au | |
| Mechanical | Contact force | 100g±20% at 1.0mm working stroke |
| Full stroke | 1.5mm | |
| Life test | 20,000 cycles | |
| Electrical | Rated current and voltage | DC 12V;1A |
| Contact-resistance | 50milliohm Max |
